Bump Stick Lower Control Arms

9998-135-BS – 13.5″
9998-140-BS – 14.0″
9998-145-BS – 14.5″
9998-150-BS – 15.0″
9998-155-BS – 15.5″
9998-160-BS – 16.0″
9998-165-BS – 16.5″
9999-155-BS – 15.5″
9999-160-BS – 16.0″
9999-165-BS – 16.5″
9999-170-BS – 17.0″
9999-175-BS – 17.5″
9999-180-BS – 18.0″
9999-185-BS – 18.5″

Compare
Category:

Description

Are designed for use with our P/N 6055 & 6060 Bump Sticks.
Bump Stick & Coil Over are mounted in line. This provides the same motion ratio which simplifies load number calculations.
Bump Stick & Coil Over are mounted at the vertical center line of the tube which simplifies motion ratio calculations.
Lower Control Arms have the same features as our Single Drop Lower Control Arms.
Control Arms include a steel strut with a 3/4″-16 RH male thread. Aluminum hex tube & rod ends required.
9998-135-BS – 13.5″
9998-140-BS – 14.0″
9998-145-BS – 14.5″
9998-150-BS – 15.0″
9998-155-BS – 15.5″
9998-160-BS – 16.0″
9998-165-BS – 16.5″
9999-155-BS – 15.5″
9999-160-BS – 16.0″
9999-165-BS – 16.5″
9999-170-BS – 17.0″
9999-175-BS – 17.5″
9999-180-BS – 18.0″
9999-185-BS – 18.5″